Pages

March 27, 2012

DIY Waterproof Sandbox Cover

I previously posted how we use a plastic kiddie swimming pool for our sandbox.  But, it had no cover...so, I made one.  A waterproof one. 
It's super cheap, and super easy, and works perfectly.  Here are the steps:
You'll need:
A vinyl table cloth (size to fit-a 70 inch round works perfect for our sandbox).  This one was $3.99 at the local Walmart)
Straight pins
a sewing machine
Wide elastic
One safety pin


Take your vinyl tablecloth out of the package and lay it out on a flat surface.  Fold about one inch of the outer edge in, towards the underside, and secure it with straight pins.  Do this all the way around.

Set up your sewing machine, and sew a simple stitch all the way around the entire outer edge.  The only thing to remember is to only sew the edge of the folded tablecloth because you need to leave a hollow space along the perimeter large enough to string your wide elastic through. (this will all be clearer the more we go through the instructions-it really is EASY).

After you have sewn the entire perimeter of the tablecloth, remove all the straight pins.  Cut one small vertical slit anywhere you choose along this perimeter.  This is a very small slit just big enough to get your elastic into to string it all the way through. 
Take your large elastic and put a jumbo safety pin in one end of the elastic.  This will help you string the elastic through the entire edge of the tablecloth.  It will also help you find the end of the elastic if you ever loose it in the process inside the tablecloth edge.  I also had to buy a few packs of the wide elastic and sew 2 of them together to be long enough.  Not a big deal.



This is the slit that you should have cut into the outer edge of the tablecloth.  This slit will be the opening where you insert the wide elastic.  I always attach a gumbo safety pin to one end of the elastic.  This helps me to feel and lead the elastic through the entire edge of the tablecloth and also helps me find it if I lose my place.  You'll be doing this 'blind' since you cannot see the elastic and safety pin while feeding it through the edge of the tablecloth.  When you have fed the elastic all the way around the perimeter of the tablecloth and have come full circle to the slit that you cut; simply pull the 2 ends of the elastic and tie a knot to secure all your work.

When you are done you'll have what looks like a giant shower cap:)
Here is the top view.
 Here is the underside of the sandbox cover


Viola!  That's it.  Super easy, simple, cheap, and it takes about 30 minutes to do from start to finish.

Here is our sandbox


And...tada!  Here it is with the waterproof sandbox cover on it.

Here is the evidence that it is waterproof.  (Last year I made the same thing but in a different pattern and it held up to feet of snow piled on it and never let one drop of moisture into the sandbox.  I just like to change things up and make a new one every summer with a different print on it).


8 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. This is really easy and cheaper as what I was looking into. Thank you very much for posting this idea. know I know how to cover my babies sandbox.

    ReplyDelete
  3. Great idea...l just used my gluegun instead of bringing out the sewing machine...even simpler

    ReplyDelete
  4. Hello! My name is Dina Kupfer and I am a Morning Anchor at ABC10 in Sacramento, CA. Would I be able to use your photos for a segment I am working on about DIY summer activities that won't break the bank? We would like to show your photos tomorrow on the morning broadcast, if possible! We will make sure to courtesy you! Thank you and please email me your reponse at dkupfer@abc10.com
    Best, Dina Kupfer

    ReplyDelete
  5. This blog was... how do I say it? Relevant!! Finally I have found something that helped me.
    Kudos!

    ReplyDelete
  6. I'm going to begin following you on Facebook.

    ReplyDelete
  7. Thanks for doing this, i'm definitely going to try it.

    ReplyDelete